- Download Resetter Canon Ip 1880
- Canon Pixma G2000 Resetter
- Canon G2000 Resetter Free Download
- Link สําหรับ Download Reset Canon G2010 Free
Jan 29, 2021 Download / Installation Procedures. IMPORTANT: Be sure to connect your PC to the Internet while performing the following: 1. Download the file. For the location where the file is saved, check the computer settings. Double-click the downloaded.exe file. It will be decompressed and the Setup screen will be displayed. Download (Canon Service Tool V5306) This (Canon Service Tool v5306) is compatible with Windows PC, in conjunction with Windows Vista, Windows XP, Windows 10, Windows, 8.1, as well as Windows 8. So you are among the people in search of the links to get this tool, you are at the right place. They come in 32 or 64 bit, so check them out below.
Download Resetter Canon Ip 1880the tools that you need to do this can be downloaded here :
CANON G2010 SERVICE TOOL
Download and extract using WinRAR or any aps that support unzipping file archive.
Canon Pixma G2000 Resetter
Canon G2010 problem code 5B00 mean the waste ink counter overflow, you should be reset Canon G2010 Waste Ink Counter (clear Waste Counters). The printer will blink as follow: Orange light – 7 times. Alternatively Green (Power) and Orange.
And computer show up problem “SupportCode: 5B00”
Canon G2000 Resetter Free Download
Link สําหรับ Download Reset Canon G2010 Free
Now , enter Canon G2010 service mode:
How to put Canon G2010 printer in service mode :
Step 1: Turn off Canon G2010 printer
Step 2: Press and hold printer’s RESET button
Step 3: Press and hold printer’s POWER button.
Step 4: Released printer’s RESET button, POWER still pressed
Step 5: Press and released Canon G2010 printer’s RESET button 5 times @ 6 times (Bypass scanner)
Step 6: Released Canon G2010 printer’s POWER button:
Now, Canon G2010 printer on SERVICE MODE condition. In this condition, computer detect found new hardware.
Step 7: When computer detect FOUND NEW HARDWARE, press CANCEL
Run the service tool that we downloaded earlier..click on 'Accept'
Now click 'Start' under the Canon Tool
Now click the service tool in the number order...after clicking '1' the printer will print some number code, make sure the printer is loaded with 1 piece of paper.
After clicking '2' the printer will move it printhead a few times, just wait until it stop.
After clicking '3' the printer will print status sheet.
and you are all done, just restart the printer and you can print normally again.
Now check Canon G2010 printer status in Control Panel, If it shows “Printer is online“, your Canon G2010 printer is ready to print – no errors – no waste Counters Overflow.