Rkdevtool

Rkdevtool download boot fail

Aug 30, 2021 Rockchip batch tool & androidtool rkdevtool is a program designed to install firmware img formats on android devices base on rockchip chipset useful for upgrade update firmware, unbricking or repair solution if softbrick or boot loop. How to flash firmware via this tool? Feb 11, 2018 Registered. Device42 is a robust, comprehensive data center and network management software solution specifically designed by engineers with IT experience to discover, document, and manage medium and large datacenters. Featuring an intuitive web-based interface, Device42 actionable insight into enterprise. Traditional Mobile Device Management. This is a common guide for reflashing RockChip based devices. All RK SoC (RK3066, RK3188, RK3288, RK3229, RK3328, RK3399 and so on) supports the same applications and drivers for Host system, if 3rd party producers do not add any other limitations or special options.

1. Bring the board into maskrom or rockusb loader mode

Rkdevtool V2.59 Download

  • Use typec usb cable to connect RV1126 CE Boards and Host PC. Then put your RV1126 CE Boards enter download mode(maskrom or rockusb loader mode). The method of download mode as follows: Firstly press reset key of the developing board, and then long press recovery key around 3-4 seconds to enter.

2. (Debian) Flash debian images

2. (Buildroot) Flash buildroot images

3. Reboot and enjoy!

  • Once the download of the images is complete, follow these steps:
    • Disconnect the USB cable
    • Press the reset button
  • If you flash buildroot images,after the reboot you should see buildroot startup.
  • If you flash debian images,after the reboot you should see debian startup.

1. Install Rockchip Flash Download Driver in Host machine

Rkdevtool v2.59 downloadRkdevtool

Rkdevtool_androidtool

  • In the network disk tools Directory: toolswindowsDriverAssitant_v5.0.zip Double click DriverAssitant_v5.0 DriverInstall.exe,then automatically install rockchip flash download driver in your host windows machine.

2. Bring the board into maskrom or rockusb loader mode

  • Use typec usb cable to connect RV1126 CE Boards and Host PC. Then put your RV1126 CE Boards enter download mode(maskrom or rockusb loader mode). The method of download mode as follows: Firstly press reset key of the developing board, and then long press recovery key around 3-4 seconds to enter.

3. Flash images

Rkdevtool

Rkdevtool Download

  • In the network disk tools Directory: toolswindowsRKDevTool_Release.zip Double click RKDevTool_ReleaseRKDevTool.exe.
  • Flash images ass instructed in the GUI

4. Reboot and enjoy!

  • Once the download of the images is complete, follow these steps:
    • Disconnect the USB cable
    • Press the reset button
  • If you flash buildroot images,after the reboot you should see buildroot startup.
  • If you flash debian images,after the reboot you should see debian startup.
Comments are closed.