Smith And Wesson Serial Number Lookup

  1. Free Smith And Wesson Serial Number Lookup
  2. Smith And Wesson Serial Number Lookup For 38 Special
  3. Smith And Wesson Serial Number Lookup J Frame
  4. Smith And Wesson Serial Number Lookup Gun
  5. Smith And Wesson Serial Number Dates
  6. Smith And Wesson Serial Number Lookup N Frame
  • Smith And Wesson Serial Number Lookup. Collected from the entire web and summarized to include only the most important parts of it. Can be used as content for research and analysis.
  • Manufactured circa 1880. Smith And Wesson K Frame Serial Number Lookup. It has a 6-shot fluted cylinder and square butt with walnut grips. Dating a Smith & Wesson Revolver: This list is merely a general guide and not meant to be exact. S&W has used a variety of adjustable rear sights over the years, but most have a removable blade insert.
  • SMITH WESSON SERIAL NUMBER LOOKUP. Smith & Wesson 78G very nice comes complete with box matching serial number to the pistol, manual original power lets and pellets This is the more desireable version. Well, you have not given much information. But it looks like a serial number for a.38 Military & Police Model of 1905, 4th.
  • Smith And Wesson Search By Serial Number; I've been trying to find out the year of a S&W Model 36(no dash) 38 special, 3' barrel, blue. The serial number is 48J3XX Thanks in advance.:cheers: Couldn't find a Model 36 SN that is like yours. 1950-1969 shows 5-6 digit numbers with no letters and 1969-1983 all SN's start with J.

Seems like a quick internet search is all that's required to match a serial number to a manufacture date. But not Smith & Wesson. I do realize they weren't good about keeping them in order and that a higher serial number doesn't always mean a later manufacture date. But I can't find any information at all.

Smith & Wesson Model 1
A Smith & Wesson Model 1, 2nd Issue. This is a two patent date variety shown next to a period box of .22 short black powder cartridges.
TypeRevolver
Place of originUnited States
Service history
In service1861–1865
Used byUnited States
Confederate States of America
WarsAmerican Civil War
Production history
ManufacturerSmith & Wesson
Produced1857-1882
No. builtapprox. 12,000 (1st Issue), 110,000 (2nd Issue), 131,000 (3rd Issue)
Specifications
Caliber
ActionSingle Action
Feed system7-round cylinder
SightsFixed

Crane and crane recess are also serial numbered to each other, but this is a different number then the revolvers serial number as is correct for Victory model revolvers. The Victory Revolver was produced during World War II, it is a variation of the Military & Police Model of 1905, fourth change and had the following characteristics between. The serial number should be stamped inside one of the grips. I suspect your revolver is actually a.32/20 Hand Ejector, Model of 1905, 4th change. If so, the right side of the barrel would read 32 WCF CTG between two Maltese crosses. Your serial number falls within the group for these revolvers. They were produced from 1915-1940. Smith Wesson K 22 Serial Number Dating. March 327, Because I like the pinned barrel, I would concentrate on clean specimens from - please click for source There's not a huge difference in any of them for the revolver. Anything earlier than should be good, and any s which have the age model would be good. Please enter the serial number below: Please enter the serial number below.

The Smith & Wesson Model 1 was the first firearm manufactured by Smith & Wesson, with production spanning the years 1857 through 1882. It was the first commercially successful revolver to use rimfire cartridges instead of loose powder, musket ball, and percussion caps. It is a single-action, tip-up revolver holding seven .22 Short black powder cartridges.[1]

History[edit]

Lookup

Early history[edit]

As Samuel Colt's patent on the revolver was set to expire in 1856, Horace Smith and Daniel B. Wesson were researching a prototype for a metallic cartridge revolver. When they discovered that a former Colt employee named Rollin White held the patent for a 'Bored-through' cylinder, a component needed for this new invention, the two partners approached White to manufacture a newly designed revolver-and-cartridge combination.[2]

Rather than make White a partner in their company, Smith and Wesson paid him a royalty of $0.25 on every 'Model 1' revolver that they made. It would become White's responsibility to defend his patent in any court cases which eventually led to his financial ruin, but was very advantageous for the new Smith & Wesson Company.[2]

Variants[edit]

The Model 1 had three issues or major variants, with each subsequent issue introducing significant technical changes.

1st Issue[edit]

Model

The 1st Issue of the Model 1 was the first major iteration (and the least common), with approximately 12,000 produced over a three-year period. The features that easily distinguish the 1st issue are the flared, square cornered shaped grip (also seen in the 2nd Issue), the small round side plate, the round profile of the frame between the back of the cylinder and the grip, a split articulated hammer, and the flat spring barrel latch seen in some early variants.[2]

There are six known variations of the Model 1, first identified in an article by John Kountz in the April 1956 issue of 'The Gun Report'. In this article, Kountz noted specific differences in the recoil shield, the barrel latch (the first two variations used a dart style flat spring catch, while later variations used a larger bayonet release), the rifling and other subtle differences.[3]

Free Smith And Wesson Serial Number Lookup

Serial numbers were issued sequentially for the Model 1 1st Issues ranging from 1 through approximately 12,000.[3]

2nd Issue[edit]

The 2nd Issue of the Model 1 looks similar to the 1st Issue, with several notable differences. The side plate on the 2nd Issue is much larger and irregularly shaped. The profile of the frame is flatter (a likely concession for manufacturing efficiency), and the hammer is one piece. Model 1 2nd Issues retain the flared, square cornered shaped grip and the octagonal tip-up style frame, and at first glance the two issues are easy to confuse.[3]

There are several variations of the 2nd Issue guns. Variants between serial numbers 12,000 through to about 20,000 involve the shape of the side plate ('straight' or 'round'), the design of the trigger spring (flat spring, V spring or coil spring), and the number of patent dates on the cylinder (two or three). There was also a decrease in the size of the barrel roll stamps at around serial number 95,000. 2nd Issue marked '2D QUAL'TY' are also seen occasionally.

There were approximately 110,000 2nd Issues produced from 1860 through 1868, with serial numbers ranging from approximately 12,000 (following the 1st Issue) through to approximately 120,000.[3]

3rd Issue[edit]

Model One Third issue. Open for loading
Lock of Smith & Wesson Model One Third variation with side plate removed. The mainspring is under tension from a screw in the low-front grip frame as on modern S&W revolvers.

The Model 1, 3rd Issue represented a substantial redesign for the Model 1, with a fluted cylinder, a round barrel and a rounded 'bird's head' style grip. Finishes included full nickel plating, full blued steel, and a 'half plate' nickel/blue combo, and there were two barrel lengths offered by the factory. Variants include the 'square' and 'triangular' top strap design that changed around serial number 9,500. The 3rd Issue guns were produced from 1868 through 1882 with serial numbers from 1 through approximately 131,000.[3]

Popularity[edit]

The Model 1 was in popular demand with the outbreak of the American Civil War as soldiers from all ranks on both sides of the conflict made private purchases of the revolvers for self-defense. So much that orders for the Model 1 revolver outpaced the factory's production capabilities, forcing Smith & Wesson to expand into a new facility and began experimenting with a new cartridge design more suitable than the .22 Short in 1860.[4]

This popularity led to numerous knockoffs and patent infringements by other armsmakers. Rolin White and S&W brought infringement cases against Manhattan Firearms Company, Ethan Allen, Merwin & Bray, National Arms Company and others. The courts mostly allowed these manufacturers to continue production runs, with a royalty on each revolver paid to White. Lightblade vr free games. In some cases, Smith & Wesson bought the revolvers back to remark and sell; these are marked 'APRIL 3 1855' as a patent date.[5]

See also[edit]

Smith And Wesson 22 Revolver Serial Number Lookup 22

References[edit]

Smith And Wesson Serial Number Lookup For 38 Special

Smith & Wesson Serial Number Lookup

  1. ^Chicoine, David (2005). Antique Firearms Assembly/Disassembly: The Comprehensive Guide to Pistols, Rifles & Shotguns. Iola, Wisconsin: Krause Publications. pp. 171–172. ISBN0-87349-767-8.
  2. ^ abcBoorman, Dean K. (2002). The History of Smith & Wesson Firearms. Globe Pequot Press. pp. 18–22. ISBN978-1-58574-721-4.
  3. ^ abcdeSupica, Jim; Nahas, Richard (2007). Standard Catalog of Smith & Wesson. Iola, Wisconsin: F+W Media, Inc. pp. 30–37. ISBN0-89689-293-X.
  4. ^Kinard, Jeff (2004). Pistols: An Illustrated History of Their Impact. ABC-CLIO. pp. 114–117. ISBN978-1-85109-470-7.
  5. ^Walter, John (2007). Rifles of the World (3 ed.). Krause Publications. pp. 108–109. ISBN978-0-89689-241-5.

Smith And Wesson Serial Number Lookup J Frame

External links[edit]

Wikimedia Commons has media related to Smith & Wesson Model 1.
  • Look at Smith & Wesson Mod. NO. 1 (3rd Issue) Video

Smith And Wesson Serial Number Lookup Gun


38 Smith And Wesson Serial Number Lookup

Smith And Wesson Serial Number Dates

NumbersSmith and wesson serial number lookup model 29

Smith And Wesson Serial Number Lookup N Frame

Retrieved from 'https://en.wikipedia.org/w/index.php?title=Smith_%26_Wesson_Model_1&oldid=973389233'
Comments are closed.